INA NKX25-Z complex bearings

Designation of housing:F209-; C:31.85 kN; Weight:2.37 kg; G:M6x1; A1:16 mm; d1:62 mm; B1:56.3 mm; B:42.8 mm; L:137 mm; T min.:-40 °C;

L:149 mm; L2:16 mm; T min.:-20 °C; B:51.6 mm; C0:23.2 kN; N2:49 mm; P:300 mm; L1:90 mm; C:35.1 kN; s1:25.8 mm;

A2:36.4 mm; A4:26 mm; Z:48.8 mm; L:135 mm; Designation of bearing:UC207-21G2; A:34 mm; C0:15.2 kN; e:11 mm; T min.:-20 °C; Designation of housing:FC207N-;

Nlim:9,600 rpm; Ca min:3 mm; Da max:71.5 mm; d1:59.1 mm; Y0:0.4; T:22.75 mm; Min operating temperature, Tmin:-40 °C; Max operating temperature, Tmax:120 °C; d:35 mm; da max:44 mm;

J:121 mm; T min.:-40 °C; N1:21 mm; C0:11.2 kN; Recommended tightening torque for set screw:3.7 Nm; A:50 mm; L1:56 mm; Weight:1.79 kg; Designation of housing:PH206N-; s1:19.05 mm;

H3:90; A:34 mm; A1:9 mm; A2:43.3 mm; Designation of housing:FC207N-; B:37.6 mm; s1:36.3 mm; L:135 mm; S:18.8 mm; Recommended tightening torque for set screw:11.5 Nm;

J:121 mm; T min.:-40 °C; N1:21 mm; C0:11.2 kN; Recommended tightening torque for set screw:3.7 Nm; A:50 mm; L1:56 mm; Weight:1.79 kg; Designation of housing:PH206N-; s1:19.05 mm;

d:8 mm; Da max:20 mm; f0:12.5; Dynamic load, C:3.35 kN; D:22 mm; Fatigue limit load, Cu:0.06 kN; Min operating temperature, Tmin:-20 °C; rs min:0.3 mm; Static load, C0:1.4 kN; da min:10 mm;

H3:90; A:34 mm; A1:9 mm; A2:43.3 mm; Designation of housing:FC207N-; B:37.6 mm; s1:36.3 mm; L:135 mm; S:18.8 mm; Recommended tightening torque for set screw:11.5 Nm;

H3:90; A:34 mm; A1:9 mm; A2:43.3 mm; Designation of housing:FC207N-; B:37.6 mm; s1:36.3 mm; L:135 mm; S:18.8 mm; Recommended tightening torque for set screw:11.5 Nm;