NKE RTUE30 bearing units

A5:13.9 mm; A:21 mm; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:SP203-205/47-; d:19.05 mm; d1:32.4 mm; C:12.8 kN; Designation of bearing:ES204-12G2T20; B:21.4 mm; T min.:-20 °C;

Flinger Type:Rubberized; UPC:782475117451; Bearing Family:Eccentric Collar Bal; Housing Coating:Powder Coat; Brand:Baldor-Dodge; Seal Type:Single Lip; Retainer Material:Nylon; Expansion Type:Non-Expansion; Retainer Type:Std Retainer; Ball Bearing Housing Series:204 Series;

T max.:200 °C; T min.:-20 °C; C:81.6 kN; A5:45 mm; C0:51.8 kN; Weight:4.8 kg; G:M6x1; d:60 mm; s1:35.5 mm; Designation of housing:C312-;

Designation of bearing:UC207-21G2T20; Designation of housing:FA207N-; C0:15.2 kN; G:M6x1; C:25.7 kN; N:15mm; e:19 mm; J:130 mm; L1:82 mm; s1:21.45 mm;

Brand:SNR; Characteristic cage frequency, FTF:0.44 Hz; Number of lubrication holes:3; Max operating temperature, Tmax:200 °C; Static load, C0:1,240 kN; Characteristic inner ring frequency, BPFI:13.89 Hz; Y1:3.07; Characteristic rolling element frequency, BSF:8.82 Hz; rs min:2.1 mm; Min operating temperature, Tmin:-40 °C;

F:66.5 mm; r1a max:1 mm; Mass (without HJ ring):0.65 kg; ra max:1.5 mm; B:21 mm; E:88.5 mm; Brand:NTN; Dc max:87 mm; Min operating temperature, Tmin:-40 °C; Product Group:B04144;

H:52.4 mm; J:151.5 mm; B:49.2 mm; C:31.85 kN; G:M6x1; C0:20.8 kN; A:54 mm; H2:106.4 mm; Designation of housing:PLE209-; s1:24.6 mm;

G:R1/8"; Dz:80 mm; T min.:-20 °C; B:32 mm; Designation of bearing:US207G2T20; A1:27 mm; C:25.7 kN; H:47.6 mm; E:12.5 mm; Recommended tightening torque for set screw:5.5 Nm;

Flinger Type:Rubberized; UPC:782475117451; Bearing Family:Eccentric Collar Bal; Housing Coating:Powder Coat; Brand:Baldor-Dodge; Seal Type:Single Lip; Retainer Material:Nylon; Expansion Type:Non-Expansion; Retainer Type:Std Retainer; Ball Bearing Housing Series:204 Series;

Recommended tightening torque for set screw:8 Nm; H:105 mm; L:190 mm; N1:25 mm; A1:36 mm; Designation of open end cover:SCOU209-26; C:31.85 kN; N:17mm; B:41.2 mm; H2:157 mm;

G:M6x1; N2:55 mm; s1:28.5 mm; N:34mm; Weight:4.06 kg; A2:38 mm; Recommended tightening torque for set screw:16.8 Nm; A:55 mm; L2:20 mm; C:53 kN;

H:52.4 mm; J:151.5 mm; B:49.2 mm; C:31.85 kN; G:M6x1; C0:20.8 kN; A:54 mm; H2:106.4 mm; Designation of housing:PLE209-; s1:24.6 mm;