SNR 22219EAW33 thrust roller bearings

G:M10x1; N:25mm; Recommended tightening torque for set screw:33 Nm; H1:30 mm; Weight:8.99 kg; J:232 mm; Designation of housing:P216-; C:72.5 kN; Designation of bearing:UC216G2L3; N1:31 mm;

L:80 mm; A2:40.2 mm; A:31 mm; A1:13 mm; C0:11.2 kN; S:15.9 mm; Designation of bearing:UC206G2L4; B:38.1 mm; s1:19.05 mm; Designation of housing:FL206N-;

C:19.5 kN; d:30 mm; B1:48.3 mm; L:80 mm; H:144 mm; Designation of housing:FA206-; A1:14 mm; J1:58 mm; J:117 mm; A2:48.1 mm;

H:250 mm; Designation of bearing:UC212-38G2L3; A:48 mm; G:M6x1; C0:32.8 kN; Dz:120 mm; d:60.32 mm; T max.:100 °C; J1:92 mm; Designation of open end cover:SCOU212-38;

da max:61.5 mm; f0:13.1; Static load, C0:32 kN; rs min:1.5 mm; Characteristic cage frequency, FTF:0.38 Hz; D:100 mm; Fatigue limit load, Cu:1.45 kN; Brand:NTN; Characteristic inner ring frequency, BPFI:4.94 Hz; Min operating temperature, Tmin:-25 °C;

J:114 mm; A:68 mm; C0:32.8 kN; A1:36 mm; s1:32.55 mm; Designation of housing:PA212-; T max.:200 °C; H1:15 mm; Designation of bearing:UC212-38G2T20; Recommended tightening torque for set screw:16.8 Nm;

C:19.5 kN; d:30 mm; B1:48.3 mm; L:80 mm; H:144 mm; Designation of housing:FA206-; A1:14 mm; J1:58 mm; J:117 mm; A2:48.1 mm;

da max:61.5 mm; f0:13.1; Static load, C0:32 kN; rs min:1.5 mm; Characteristic cage frequency, FTF:0.38 Hz; D:100 mm; Fatigue limit load, Cu:1.45 kN; Brand:NTN; Characteristic inner ring frequency, BPFI:4.94 Hz; Min operating temperature, Tmin:-25 °C;

L:80 mm; A2:40.2 mm; A:31 mm; A1:13 mm; C0:11.2 kN; S:15.9 mm; Designation of bearing:UC206G2L4; B:38.1 mm; s1:19.05 mm; Designation of housing:FL206N-;

Characteristic inner ring frequency, BPFI:10.2 Hz; d:31.75 mm; Static load, C0:97 kN; Min operating temperature, Tmin:-40 °C; a:23.37 mm; T:29.37 mm; Nlim (grease):5,400 rpm; Mass:0.63 kg; Brand:NTN; Dynamic load, C:72 kN;