75 mm x 130 mm x 25 mm FAG 30215-A AC Compressor OEM Clutch Bearing

Limiting speed:4800 r/min; Da:109 mm; F:100 mm; D:120 mm; Db:101 mm; Reference speed:4000 r/min; E:108 mm; Mass bearing:1.04 kg; d:90 mm; Basic dynamic load rating C:67.1 kN;

Accessories:One Shield & Snap-Ri; d:110.000 mm; Fillet Radius ra:3.00 mm; D:320.0000 mm; Basic Static Radial Load Rating Co:260000 N; B:70.00 mm; Oil Speed Rating Open/Shielded n2:2600 rpm; Grease Speed Rating Open/Shielded n1:2100 rpm; Basic Dynamic Radial Load Rating C:270000 N; Sealed Speed Rating n3:1500 rpm;

Accessories:Shield & Seal; Sealed Speed Rating n3:6000 rpm; Oil Speed Rating n2:8000 rpm; D:72.0000 mm; Fillet Radius ra:1.00 mm; B:30.20 mm; Grease Speed Rating n1:6000 rpm; Basic Static Radial Load Rating Co:36500 N; Basic Dynamic Radial Load Rating C:39100 N; d:35.000 mm;

Ca:72.619 mm; Cap bolt, SAE grade:8; PosiTrac Plus contact element:2 x B10724-122; H1:133.35 mm; End plug (suffix Y):EPR 27; PG:1/4 NPT; P90°:111 kN; J1:69.85 mm; Cap bolt recommended tightening torque:1220 N·m; A1:120.65 mm;

B:11 mm; r1,2 min.:1.1 mm; d:190 mm; Mass shaft washer:1.45 kg; d1:237 mm;

H:120.5 mm; H1:46 mm; s1:19.8 mm; Recommended diameter for attachment bolts, inch G:0.375 in; d:23.812 mm; J1:28.6 mm; T:41.6 mm; Bearing:YAR 205-015-2RF/VE49; Housing material:Composite for food a; L:70 mm;

d:26.990 mm; Fillet Radius ra:1.00 mm; D:57.1500 mm; Preload:50 lb; Oil Speed Rating Max. n2:8000 rpm; Oil Mist Speed Rating Max. n3:12000 rpm; Grease Speed Rating Max. n1:5000 rpm; B:25.40 mm; Keyway f:1.6 mm; Keyway e:27.5 mm;

B:13 mm; Dimension series:2FB; da max.:22 mm; Calculation factor e:0.28; Basic static load rating C0:20 kN; ra max.:1 mm; Limiting speed:18000 r/min; r1,2 min.:1 mm; Calculation factor Y0:1.1; Fatigue load limit Pu:2.08 kN;

B:45 mm; D:170 mm; Oil:56.880 kN; Pu:362 kN; with cylindrical bore:2 200 min-1; Dynamic (Cr):3 mm; Grease:516 kN; with tapered bore:3 000 min-1; rs (min):2 mm; Static (Cor):5.5 mm;

P150°:118 kN; J min.:371.475 mm; Cap bolt:3/4-10 UNC; P180°:151 kN; J1:82.55 mm; Cap bolt recommended tightening torque:515.2 N·m; h:60.325 mm; P90°:185 kN; Appropriate attachment bolt size G:0.875 in; Mass pillow block:83.9 kg;

H:120.5 mm; H1:46 mm; s1:19.8 mm; Recommended diameter for attachment bolts, inch G:0.375 in; d:23.812 mm; J1:28.6 mm; T:41.6 mm; Bearing:YAR 205-015-2RF/VE49; Housing material:Composite for food a; L:70 mm;

Accessories:Shield & Seal; Sealed Speed Rating n3:6000 rpm; Oil Speed Rating n2:8000 rpm; D:72.0000 mm; Fillet Radius ra:1.00 mm; B:30.20 mm; Grease Speed Rating n1:6000 rpm; Basic Static Radial Load Rating Co:36500 N; Basic Dynamic Radial Load Rating C:39100 N; d:35.000 mm;