FAG NU2216-E-XL-TVP2 A/C Compressor clutches Bearing

Shaft Attachment (2):Set Screw; Max Bearing Speed:3000 rpm; d:75.0000 mm; Self Aligning:Self Centering; Ball Material:Steel; Expansion Type:Non-Expansion; Base to Center Height:Standard; Housing Type:Wide Slot Take-Up; Bearing Bore Shape:Round; Ship Weight:18.9 LB;

Designation of housing:FL215-; S:33.3 mm; A1:22 mm; s1:38.9 mm; d:75 mm; T max.:100 °C; G:M10x1; C0:49.5 kN; A:55 mm; B:77.8 mm;

C0:32.8 kN; SW:5 mm; s1:39 mm; T max.:100 °C; B:33.4 mm; A5:21.4 mm; Designation of bearing:ES212G2T04; T min.:-40 °C; Recommended tightening torque for set screw:22 Nm; d:60 mm;

C0:32.8 kN; SW:5 mm; s1:39 mm; T max.:100 °C; B:33.4 mm; A5:21.4 mm; Designation of bearing:ES212G2T04; T min.:-40 °C; Recommended tightening torque for set screw:22 Nm; d:60 mm;

Characteristic cage frequency, FTF:0.4 Hz; Max operating temperature, Tmax:120 °C; Y0:1.96; Dynamic load, C:541 kN; Fatigue limit load, Cu:47.3 kN; Mass:6 kg; Y2:2.98; Da max:158 mm; D:170 mm; D1:147.4 mm;

C:12.8 kN; A1:22 mm; G:M6x1; d:20 mm; Designation of bearing:EX204G2L4; B:34 mm; H:33.3 mm; B1:43.5 mm; Weight:0.72 kg; Recommended tightening torque for set screw:5.5 Nm;

H:117 mm; Weight:1.08 kg; T min.:-40 °C; A:24 mm; d1:44.1 mm; G:R1/8"; B:23.8 mm; C:19.5 kN; H1:44 mm; C0:11.2 kN;

C:12.8 kN; A1:22 mm; G:M6x1; d:20 mm; Designation of bearing:EX204G2L4; B:34 mm; H:33.3 mm; B1:43.5 mm; Weight:0.72 kg; Recommended tightening torque for set screw:5.5 Nm;

Min operating temperature, Tmin:-40 °C; Characteristic cage frequency, FTF:0.4 Hz; d1:27.5 mm; ra max:0.6 mm; Nlim:50 rpm; f0:13.8; Characteristic outer ring frequency, BPF0:3.58 Hz; rs min:0.6 mm; Static load, C0:0.01 kN; d:20 mm;

H:125 mm; Designation of bearing:UC205-15G2T20; G:M6x1; B:34 mm; e:16 mm; S:14.3 mm; N:12mm; T max.:200 °C; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:FA205-;