FAG NU310-E-XL-TVP2 A/C Compressor clutches Bearing

Designation of housing:FL215-; S:33.3 mm; A1:22 mm; s1:38.9 mm; d:75 mm; T max.:100 °C; G:M10x1; C0:49.5 kN; A:55 mm; B:77.8 mm;

Designation of housing:FL215-; S:33.3 mm; A1:22 mm; s1:38.9 mm; d:75 mm; T max.:100 °C; G:M10x1; C0:49.5 kN; A:55 mm; B:77.8 mm;

Designation of housing:FL215-; S:33.3 mm; A1:22 mm; s1:38.9 mm; d:75 mm; T max.:100 °C; G:M10x1; C0:49.5 kN; A:55 mm; B:77.8 mm;

Designation of housing:FL215-; S:33.3 mm; A1:22 mm; s1:38.9 mm; d:75 mm; T max.:100 °C; G:M10x1; C0:49.5 kN; A:55 mm; B:77.8 mm;

Min operating temperature, Tmin:-40 °C; Characteristic cage frequency, FTF:0.4 Hz; d1:27.5 mm; ra max:0.6 mm; Nlim:50 rpm; f0:13.8; Characteristic outer ring frequency, BPF0:3.58 Hz; rs min:0.6 mm; Static load, C0:0.01 kN; d:20 mm;

H:125 mm; Designation of bearing:UC205-15G2T20; G:M6x1; B:34 mm; e:16 mm; S:14.3 mm; N:12mm; T max.:200 °C; Recommended tightening torque for set screw:3.7 Nm; Designation of housing:FA205-;

C:12.8 kN; A1:22 mm; G:M6x1; d:20 mm; Designation of bearing:EX204G2L4; B:34 mm; H:33.3 mm; B1:43.5 mm; Weight:0.72 kg; Recommended tightening torque for set screw:5.5 Nm;

d:31.75 mm; L:125 mm; e:2 mm; A1:9.5 mm; Recommended tightening torque for set screw:8 Nm; C:19.5 kN; Designation of bearing:ES206-20G2; A2:28.7 mm; N:11,5mm; J:100 mm;

Brand:SNR; Nlim:1,000 rpm; d2:350.9 mm; k:20 mm; Y0:1.72; Static load, C0:6,810 kN; Da max:480 mm; Characteristic cage frequency, FTF:0.43 Hz; Y2:2.62; Nref:510 rpm;

Shaft Attachment (2):Set Screw; Max Bearing Speed:3000 rpm; d:75.0000 mm; Self Aligning:Self Centering; Ball Material:Steel; Expansion Type:Non-Expansion; Base to Center Height:Standard; Housing Type:Wide Slot Take-Up; Bearing Bore Shape:Round; Ship Weight:18.9 LB;